Floor Tile Installing in Perth
Installing floor tiles used to be more difficult than it is now. The tile-makers have made huge strides to simplify the process. Preparation is the first step. After removing your old flooring, make sure you have a clean surface.
You can get help from an expert tiling agency in Perth to make sure your floor is prepared and properly leveled before placing tiles. The hardware store will sell a high-quality cleaner.
Use it with a stiff cloth to clean all surfaces that will be tiled. This should take some time. It is important to remove all traces of old adhesives, oil, grease, dirt, etc.
Now, determine what your pattern will look like. Sample patterns will be included in most boxes of tiles. You can choose the one that is most suitable for you.
Next, find the exact center point of the floor. Mark the center point of each wall. Next, draw a line with chalk from one wall to another and then snap it onto the floor.
The center point is where the lines intersect. This is where you will start the tiling process. Laying tile should begin at the center, and then move toward the walls.
Apply the adhesive using a notched trowel. Do not apply too much adhesive at once. It will dry out and set before it can be spread over the entire floor.
After waiting about 15 minutes, apply the tile. The adhesive should be still sticky but not runny. Make sure that the first tile matches perfectly with all four walls before you begin.